The savings comes from changing out your infrastructure, not talking about it.
What Is Your Time Worth?
Let's say you spend $10,000 to have the audit completed. If you took about 50 hours, you would be able to evaluate the majority of your electrical systems in your facility (of course this depends on the size of the facility).
If you spent 50 hours doing this yourself, you would make $200 per hour. Not bad. Is it hard to do?
Not That Difficult, Simple Math Really
It really isn't that hard. We figured out how to do it and I want to show you how to do this yourself. We have created a step by step system to (Free) provide you with the framework and we guide you along the way.
If you need some additional help, we can provide that too. We have done this several times and we have been electrical contractors for over 33 years. We know lighting and motors.
You may not be able to analyze your air flow, or tell you about your storm water requirements, but we can tell you to look up at the lights first, before anything else.
Your lighting is likely costing you dearly.
Start With Lighting
Lighting accounts for nearly 40% of a buildings cost. Motors typically make up another 20-30% so most of your electrical costs are tied up in lighting and motors.
The first "How To Do Your Own Commercial Energy Audit" series is going to focus on lighting, but we will be bringing you motors in the very near future.
Motors are much complicated and we want to get you comfortable with the fact that YOU CAN DO THIS!
We will show you how.
Or....
Learn More About Energy Efficiency
There is a lot of bad information out there about energy efficient products. We see Engineers and Contractors everyday to are fighting building owners to stay with thier old, outdated way of thinking.
Let us "show you the light" about energy efficiency and how it can make your business more profitable. Just click the button below....
Do you think you can do your own commercial energy audit? Let us know what you think in the comments section below.